VZR.247800.001
IM
Turnstile CUBE C-03
Installation Manual
27
Table 3
– Assigning the ACCES OUT contact group
Identification of contacts
Assignment of contacts
LEFT
Status of the "LEFT" button (1)
RIGHT
Status of the "RIGHT" button (3)
STOP
Status of the "STOP" button (2)
АР
Status of the "AP" button (4)
LEFT, RIGHT, STOP and АР outputs reflect current state of the CP buttons
– the transistor opens when a corresponding button is pressed.
LEFT, RIGHT, STOP and АР outputs can be connected either directly to
the ACS controller or via a relay. Figure 13
– When using the relay, it is
MANDATORY(!)
to connect a diode in parallel to the winding.
Figure 13
– Diagram for connecting a diode in parallel to the relay winding
motherboard
Motherboard
