ASSEMBLY
1. Take the lamp out and lay it on a smooth surface.
2. Remove the packing parts.
3. Put the base on the table. Insert the stem into the base and then
tighten the stop screw to secure the lamp into the base.
4. Instead of a base, this lamp can also be used with the included clamp.
5. Secure the provided clamp onto the edge of the desk/workstation etc.
Be sure to tighten securely.
6. Insert the stem of the lamp into the clamp.
7. The tension of the shade and arms can be adjusted by tightening
or loosening the friction knobs at the top of the lamp and on the arms.
The knobs should be adjusted on a regular basis or after extended use
to insure proper tension is maintained in the arms.
8. Plug-into wall outlet.
9. Turn on the switch located on the cord of the lamp.
Replacement parts:
Clamp OXD3981624K
LED Module OXD3981612K
PARTS
