Ver. 06.30.20
How to align barrel nuts and bolts
Insert a guiding bolt into the end of a
barrel nut
Align the barrel nut inside of the compo-
nent with the bolt used to connect the
components
Once the component bolt is aligned and
threaded, simply pull the guiding bolt
from the end of the barrel nut.
STEP 2
Secure corner post to the table top using two of the
metal washers and two of the Hex Nuts with the Hex
Wrench provided. Repeat Steps 1-2 for the remaining
corner posts.
INSTRUCTIONS
STEP 1
Lay table top upside down on a clean, flat surface.
Insert the threaded rods on one corner post into holes
located on one corner of table top.
Ver. 2019.06.03
STEP 3
Position pedestal base onto legs as shown. Insert one
barrel nut into hole on the side of a leg. Align the barrel
nut to receive the machine bolt through the pedestal
base and into the leg.
STEP 4
Tighten Bolt with allen wrench and repeat for
remaining legs.
STEP 5
Turn upright and enjoy!
1
2
1
2
A
B
D
C
3
C
C
C
C
3
D
D
D
D
