Step 1
Place the pegs of the seat assembly into the holes of the front
rail . Be sure that the “front” label on the bottom of the seat faces
the front rail.
(Alternate view)
Step 3
Slide one of the back assemblies onto center brace and insert the
peg of seat assembly into the hole of the back assembly.
Step 2
Step 2
Hold the center brace upright, and slide the front rail, with seat
attached, into the slot at the front of center brace.
Step 4
Slide right arm into place, aligning the three mortise holes in the
arm with the two tenons of the back assembly and tenon of front rail.
NOTE: Tenon of front rail goes into the upper mortise of arm assembly.
Repeat steps 3-4 for the remaining back and arm assembly.
Assembly Instructions
page 2
Essex Bench - 8 '
5
4
4
6
6
3
3
3
1
1
5
5
5
6
