STEP 4
With a hammer, drive 4 dowels into the predrilled holes
found on the front of the leg assemblies to hold the front
rail into place. Drive the remaining 8 dowels into the
predrilled holes located on the back of the leg assemblies
to hold the back in place. Insert the tapered end of the
dowels first.
STEP 2
Locate the small label on the bottom of the seat that reads
“front”. With the front of the seat toward the front of the
bench, line up and insert the front rail and seat into the
right leg assembly.
INSTRUCTIONS
STEP 1
On a clean flat surface, lay right leg assembly on its side
mortise holes facing up. Place the back into the mortise
of the right leg assembly.
Ver. 2019.06.03
1
3
4
STEP 3
Line up and place left leg assembly onto those parts
already assembled.
STEP 5
Using a phillips head screwdriver, screw the 4 total wood
screws into the predrilled holes on the underside of the
seat to attach the seat to the arm assemblies as shown.
STEP 6
Enjoy your new chair!
2
5
3
A
1
5
4
2
3
5
A
A
A
A
A
A
5
3
2
5
B
B
B
