5
bar icon (
) at the top left corner, and then select “Add New Devices”.
The gateway will allow ZigBee devices to join its ZigBee network within
60 seconds. You can press the "Z" button again once or tap "Cancel" in the
mobile app to exit.
3.3 For future update
For Android: Tap the device bar to enter the gateway interface, then tap the
tool bar icon (
) at the top left corner, tap “Setting” and select “About” to
check and download the latest gateway version (if any).
For iOS: Tap the device bar to enter the gateway interface, then tap the tool
bar icon (
) at the top left corner, select “About” to check and download
the latest gateway version (if any).
4
FAQ
1. How can I clear the network information on the gateway?
A1: Press the power button to power off the gateway. After that press and
hold the Bluetooth button and "Z" button together, and then press the power
button to power up the gateway, release the bluetooth button and the "Z"
button after 3 seconds when the gateway is turned on to clear the network
information (Network LED indicator will start flashing slowly).
2. How to manually configure the gateway?
Press the power button to power off the gateway. After that press and hold
the Bluetooth button and "Z" button together, and then press the power
button to power up the gateway, release the bluetooth button and the "Z"
button after 2 seconds when the gateway is turned on to set it to manual set
up mode. Then follow the steps in section 3, to continue set up the gateway.
