4
2.2.
Buttons Introduction
Rotary button
Turn ON and OFF the LED bulb.
Adjust the brightness of the LED bulb.
Adjust the color temperature of the LED bulb.
Reset button
Return the device to default factory settings by pressing the reset
button for 10 seconds (the LED indicator will flash 3 times in three
seconds and flash again 3 times in 10 seconds)
Set the device into pairing mode to pair with an LED bulb by
pressing the reset button for 3 seconds (the LED indicator will
flash 3 times)
Release Catch
Push and turn in the direction of the arrow to remove from the
back plate. This will allow battery fitment and replacement.
Color Temperature/Brightness selector switch
Select color temperature adjustment
Select brightness adjustment
