10
4.1 To get started, you will need:
• A Zigbee Gateway.
• A mobile phone with a mobile APP installed.
4.2 Adding to the gateway's network
1. Set your gateway to permit joining (see your gateway's manual).
2. Power on the Scene Switch and make sure the LED indicator is
flashing slowly (If not, reset it to factory defaults).
3. After a few seconds the Scene Switch will join the gateway
automatically and the LED indicator will become steady. Press any
button to check if the LED status flashes rapidly for 1 time, which
means it has joined successfully.
Note:
If the Scene Switch failed to join the gateway's network within
90 seconds, simply reset the Scene Switch and retry.
Configure Network
4
Link The Scene
5
1. Open your App
2. Select the gateway which you just added the scene switch
3. Tap the icon at the top left corner of the App to find your scene
switch in the "
Bundle control devices
"
4. Press the link button to select your group to link with your scene
switch
5. Now you can control your scene by using the scene switch