8
4.1 To get started, you will need:
• A Zigbee Gateway.
• A mobile phone with a mobile APP installed.
4.2 Adding to the gateway's network
1. Set your gateway to permit joining (see your gateway's manual).
2. Power on the Lighting Switch and make sure the LED indicator is
flashing slowly (If not, reset it to factory defaults).
3. After a few seconds the Lighting Switch will join the gateway
automatically and the LED indicator will stop flashing. Press any
button to check if the LED status flashes rapidly for 1 time, which
means it has joined successfully.
Note:
If the Lighting Switch failed to join the gateway's network within
90 seconds, simply reset the Lighting Switch and retry.
Configure Network
4
5
FAQ
Q 1.
Can I control this switch using a wireless switch?
Yes. You could use a ZigBee wireless switch such as SLC602 wireless
switch to control it rather than using the mobile app. You can refer to
SLC602 guide to pair with it.
