7
3.3 Connect to the gateway's network
1. Install the Smart Access Control and the LED indicator will start flashing
(reset the Smart Access Control if not).
2. Set your ZigBee gateway to permit joining and the Smart Access Control
will join the gateway's network automatically, the LED indicator will
become steady when successfully joined.
3. Check your mobile App, and you will be able to see the Smart Access
Control under “Automation” interface. If it has not, reset the Smart Access
Control and repeat step 2.
Note:
You could also use the wireless switch and the remote control to
control your Smart Access Control. To do so, simply refer to the user guide
of the specific device.
