6
4
11
6
7
9
10
16
15
14
13
12
5
17
3
8
1
2
Figure 3-1: Front Panel of the Oscilloscope
Description:
1. CH1 and CH2 input connectors.
2. Waveform generator output connector (optional).
3. Display area.
4. The
F1 - F4
keys are multi-function keys. In each menu mode, press the
corresponding key to select the corresponding menu item.
5. After pressing the
HOR
key, through the key
, you can change the
horizontal time base
setting, and observe the change of the state
information caused by it; it can also be found that the
horizontal time
base
display corresponding to the status bar has changed correspondingly;
the horizontal displacement of the signal in the waveform window can be
adjusted by pressing
.
6. Return key. Press this key to return to the previous menu; when the menu
