18
RUN/STOP.
Check whether the trigger mode of the trigger mode menu is normal or single,
and the trigger electrical level is out of the waveform range. If so, center the
trigger electrical level or set the trigger mode to automatic. In addition, you
can press
Auto
to automatically complete the above settings.
7. In the oscilloscope state, the display speed becomes slower when the
average value sampling is set in the acquisition mode or the duration is
set longer in the display settings.
It is normal.
7. Appendix
Appendix A: List of Accessories
⚫
Oscilloscope
⚫
USB-C
ᵀᴹ
to USB-A (data/charging) cable
⚫
Probe
⚫
Probe adjust
⚫
BNC to alligator clip cable
⚫
Carrying bag
⚫
Multimeter test leads (red & black)
⚫
CD-ROM (so safety sheet + quick guide)
⚫
Quick guide
⚫
Safety sheet
Appendix B: Maintenance and Cleaning
General maintenance
Do not store or place the instrument in a place where the LCD screen will be
exposed to direct sunlight for a long time.
Caution
: Do not let spray, liquid or solvent touch the instrument or probe to
