Ownice K1, Руководство пользователя

Страница: 3 / 15

Q: Before install it, how to test the device?
A: How to check with a 12V power source directly before installation. Find a 12V power
source, just hook the “13-Ill wire, 14-ACC yellow wire, 15-B+ red wire” together and
connect them with the positive pole, and the “16-Ground black wire” with the negative pole,
then press the “power on” button.
Q: How to connect the rear view camera (Only For Refer)
Please connect as attached photo
Camera: yellow video port <--> Ownice Head Unit: rear camera video input plug
Camera: red power port <--> Original Car: power cable of the reverse light (black wire <-->
ground; red wire <--> power 12v+), to make sure the Ownice Head Unit get instruction to
display the rear view image when you put the gear to reverse and the reverse light turn on.