Ownboard C-series, Руководство пользователя

Страница: 7 / 16

www.ownboard.net
Power Indicators
7
POWER INDICATORS:
Remote Power Indicator (a single LED): after the remote is powered on, if it detects the power is less than 25%
(which can barely support an one-hour operation), the Remote Power LED comes on Red; if the power is sufficient
(that is the power can support an operation of at least one hour), then the Remote Power LED comes on Green.
If there is only 5% of power (which can only support a 15-minute operation) left, the remote will vibrate a double,
long vibration (vibrate for 0.5 second, pause for 0.5 second and then vibrate again for 0.5 second ) and the Remote
Power LED starts to flash Red slowly (once a second); if there is only 2.5% of power left, the remote will vibrate a
double, long vibration again (the same as the previous) and the Remote Power LED starts to flash Red slowly; and
if the power is below the regulated value (3.4V) for safe use and the board stops, the remote will vibrate a short
vibration and then turn off automatically.
Board Power Indicator (4 LEDs in a row): one LED comes on to indicate there is still 25% of power, one LED flashes
to indicate there is only 12.5% of power left. For example, if the power ranges from 62.5% to 75%, then the four
LEDs will display in this way “○●●●”; if the power ranges from 50%~62.5%, then the four LEDs will display in this
way “○○●●”; if the power is below 25%, the remote will vibrate a double, long vibration and the four LEDs will display
in this way “○○○●” ; if the power is below 12.5%, the remote will vibrate a double, long vibration and the four LEDs
will display in this way “○○○○”; and if the voltage goes below the regulated value for safe use, then the power output
will be cut off. At this time, it’s better to stop using as soon as possible.
Notes: the remote will display the power of the remote & the board for 2 seconds and then stop when it’s powered
on and connected to the board. Press the Button A at any time can re-trigger the display of the power of the remote
& the board. the remote only displays the power of the remote when the board is not connected (to the remote).
Attention! “●” means “solid”, “
☉
” means “flash” and “○” means “die out”.