3
INTRODUCTION
PRECAUTIONS
Safety
- Exercise caution when working with any optical equipment. High-intensity fiber optic laser sources output potentially
dangerous high energy invisible light, and could cause serious, irreparable damage to the eye. Thus, it is recommended to
look into the connector port of a light source or the end of a fiber.
Operational
- It is important to keep connector ferrules and optical connector ports clean. If dirt, dust, and oil are allowed to build up
inside connector ports, irreparable damage may occur to the optics inside the port. For best results, replace dust caps after each use.
Connector
- Do NOT insert APC (Angled Physical Contact) connectors into the SC ports on the
.
NEVER
PON-2M
On the back of each PON-2M PON power meter is a label similar to the one shown below containing model number, serial number,
and power requirements.
PRODUCT LABEL
MODEL# PON-2M
SERIAL# PM13000
POWER: 9V DC
