H ow t o U s e t h e S e a t e d S u p p o r t S y s t e m ( c o n t ) :
Setting Up the Arm Rest/ Desk:
• The Arm Rest/Desk is designed to be both a desk and a
comfortable rest for your forearms.
(Fig. 6)
Please DO NOT push against the desk to lift yourself out
of the chair. The desk will not support your full weight.
• Release the cam lock and lengthen the strap by releasing
the clip.
(Fig. 7)
• Lift or lower the Arm Rest/Desk until your forearms rest
comfortably on the pad and your shoulders are slightly
rounded.
(Fig. 8)
• When you have found the position that you find comfortable,
lock the cam lock and tighten the strap by pulling on the end.
For watching TV, release the cam lock, angle the desk
down and lock the cam. (
Fig. 9)
• The pad is held on by velcro straps and can easily be removed
or repositioned.
Face Rest Set-up:
• Remove the knobs from the package and hand tighten them to
the frame.
Note: 4 knobs are provided; only 2 are required for
assembly.
(see the QuickLock
™
Face Rest Close-up under the
Product Description Section for proper placement).
• If the cam locks on the face rest are on the side of your
strongest hand, proceed to the next step. Otherwise, you can turn
the face rest around by making the following adjustments.
- Open the face rest cam locks and loosen the knobs on the
Seated Support Frame that hold the face rest in place.
- Remove the Face Rest Cushion from the Face Rest Frame.
- Slide the face rest dowels from the chair’s connector tubes
and turn the Face Rest Frame over so that the cam locks
are on the side of your strongest hand when you are seated
on the frame.
(Fig. 10)
Use Instr uctions
(cont)
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Strap
pg 4
