1.0 GENERAL
MPO light sources are designed for testing 12-fiber MPO/MTP cabling, with versions for multimode @ 850
and/or 1300 nm, and singlemode @ 1310 and/or 1550 nm. Please see the section at the end of this guide for
a complete list of configurations.
MPO light sources can be configured to automatically cycle through all 12 fibers, or manually switch via
intuitive push-buttons.
Thank you for your purchase of an Optical Wavelength Labs (OWL) MPO Series fiber optic light source.
MPO light sources also include a SC port for single fiber power/loss measurement, which is helpful when
testing MPO cabling attached to MPO cassettes.
The various models of MPO light sources contain stabilized multimode and singlemode sources designed for
accurate optical power and loss measurements, as well as polarity, in MPO fiber optic cables and links. Each
MPO light source comes with a protective rubber boot, operations manual on USB flash drive, and a USB
charger and cable.
Typical uses include telecommunications networks, data networks, cable television, and industrial equipment
control.
- 2 -