OWI Salt Water Fuel Cell Engine Car kit, Руководство по сборке и инструкция

Страница: 19 / 28

Remove Fuel Cell plate
Remove cover and
magnesium sheet
Add salt water on nonwoven fabric
How It Works
a. b. c.
2 How to fill the engine car with salt water:
Water
Salt
P17
After a period of time the salt water will be exhausted ( about 15 minutes ), the car will
begin to get slower or stop. Add a few more drops of salt water to start it again
( as in fig
3
)
Each Magnesium sheet can work for 4 hours continuously, then it will become fragmented.
Replace the sheet with a new one to energize the car. The kit includes 3 refills.
All materials used in this kit are environmentally safe and clean, no toxic substances or
disposal concerns.
Please pay full attention to the below mentioned before use!
1 How to make salt water solution:
Add salt to tap water or distilled water at
ratio of 1(salt) : 5(water) . Any percentage ratio from 20% to 99% salt water is
workable although the 20% will be the most efficient.
Do not add salt water
outside nonwoven fabric
as shown below.
Cover
Magnesium
Sheet
Nonwoven
Fabric