OWI AMP-HD2SIC6, Руководство пользователя

Страница: 7 / 20

OWI User Manual: Model AMP-HD2SIC6 Speaker Amplifier
OWI INC. 7 www.owi-inc.com
SPECIFICATIONS (MODEL AMP-HD2SIC6)
Mechanical “UL rating is dependent upon use of the Backcan and Tile Bridge”
SPECIFICATIONS
AMP-HD2SIC6
Speaker Diameter 6.5 inches
Weight of Amplifier/Speaker Assembly 3.15 pounds
Height of Amplifier/Speaker Assembly 4.5 inches
Backcan “Suitable for use in air handling spaces”
UL Listed Enclosure
Tile Bridge “Suitable for use in air handling spaces”
UL Listed Support Truss
ELECTRICAL AMPLIFIER SPECIFICATIONS
AMP-HD2SIC6
Input voltage, nominal (25 watts) 15 volts DC
Input current, operating (15VDC) 1.45 amperes peak
Input volt-amperes, peak (15VDC) 22 volt-amperes
Input voltage, maximum 16.5 volts, DC
Frequency Response,
EQ set to flat 20Hz to 20 kHz
Bass ±10dB@50Hz
Treble ±10dB@10kHz
THD + Noise
<1% at 13.5 watts, “A” weighted
S/N >82 dB
Max Power Output (28V in) 40 watts
DC Power, Standby 1.4 watts
AC Power, Sleep Mode 1.4 watts
DC Power,
Short Circuit protected Yes
Over current protected Yes
Over voltage protected Yes
Over temperature protected Yes
Minimum Load Impedance
4.0 Ω (Two 8 Ω Speakers in parallel)
Minimum Input impedance, Priority in
10,000 Ω
Minimum Input impedance, RJ45 in
150,000 Ω
Minimum Input impedance, mini-jack
37,000 Ω
Warranty 1 year
POWER SUPPLY
PS15VDC35AL5 SPECIFICATIONS
Input
100 to 240 VAC, 50-60 Hz, 1.4A
Note: Be sure to use the correct polarity on the power input.
Output 15 VDC, 3.5 amperes
Wire gauge and length Minimum 18 gauge up to 40 feet maximum length
Electrical, Power Supply UL Listed, Level 5 (Energy Star)
Weight 0.45 pounds
Size
4.7”H x 2”W x 1.2”D