OWC Mercury On-The-Go Pro, Руководство пользователя

Страница: 4 / 8

OWC MERCURY ON-THE-GO PRO INTRODUCTION
2
1.5 REAR VIEW
4 1 2 3
1 2 3
1.5.1 Rear Features
1. USB 3.0 port —
Attach the included USB 3.0 (Standard-A to Micro-B) cable here.
2. On/off switch —
Turn on and off the Mercury On-The-Go Pro here.
3. Power input —
Connect the optional 5V power adapter here (sold separately).
4. FireWire 800 ports —
Attach the included 9-9 pin FireWire 800 cable to one of
these ports and to your computer. Use the other FireWire 800 port to daisy-chain
other FireWire 800 devices.
NOTE:
Any device daisy-chained off of the Mercury On-
The-Go Pro must be powered by its own power supply. The Mercury On-The-Go
Pro does not support bus-powering other devices.