®
PCI Express Card for 2.5” SATA Drives
®
Set the OWC Mercury Accelsior S down
on a flat surface. Make sure the black SATA
connector is facing up, as shown.
DRIVE INSTALLATION INSTRUCTIONS
Slide the SATA connector on the drive
into the SATA connector on the OWC
Mercury Accelsior S. Make sure the drive
is fully seated, as shown.
Holding the drive securely to the OWC
Mercury Accelsior S, turn over the OWC
Mercury Accelsior S, as shown.
Install the four Phillips screws into the
four screw holes to secure the drive to
the OWC Mercury Accelsior S, as shown.
1
2
4
3
R1 03/06/15 SL
OWCMANACS
Copyrights and Trademarks:
© 2015 Other World Computing. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of Other World Computing. Mercury Accelsior, Other World
Computing, and OWC are trademarks of New Concepts Development Corporation, registered in the U.S. Patent and Trademark Office and in Canada. The OWC logo
and the Other World Computing logo are trademarks of New Concepts Development Corporation. Mac and OS X are trademarks of Apple Inc., registered in the U.S.
and other countries. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. Other marks may be the trademark or registered
trademark property of their owners.
Warranty Information:
The complete hardware warranty information for your OWC Mercury Accelsior S PCIe SSD can be found at:
http://eshop.macsales.com/Service/warranty_info.cfm.
These warranties are expressly subject to the website Terms & Conditions (“Terms”) & Terms of Sale located at
http://eshop.macsales.com/service/terms/sale
, which are
hereby incorporated herein and made a part hereof by this reference. For OWC’s complete return policies, please visit
http://eshop.macsales.com/service/returnpolicy.