03
1.1 SYSTEM REQUIREMENTS
-Operating System
-Mac: macOS 10.12 or later
-PC: Windows 10 or later
-Hardware
-Mac or PC with a Thunderbolt 3 or USB-C port
-USB-C hosts with USB 3.1 Gen 1 will function normally but Thunderbolt
3 or USB 3.1 Gen 2 are recommended for best performance.
-NVMe M.2 SSD in 2280 form factor with M-key connector
-Not compatible with AHCI PCIe M.2 SSDs
-Not compatible with SATA M.2 SSDs
1.2 PACKAGE CONTENTS
1.3 ABOUT THIS GUIDE
The instructions below are for customers who purchased the Envoy Pro EX with USB-C enclosure and need
to install their own NVMe M.2 SSD. This device requires an M.2 drive with a 2280 form factor. Please contact our
customer service team if you still have questions after reviewing the steps that follow.
INTRODUCTION
OWC Envoy Pro EX
with USB-C
USB 3.1 Gen 2 cable
(Type-C to Type-C)
Screw packet¹ & Rubber feet
INTRODUCTION
1. Assembly requires a Torx T5 driver.
