OVHS072-PSP User Manual
Page 3 of 4
(Polycom has many different phone models; not all the RJ9 headset jack
ports are located in the same place. But most the headset jack ports should
have “HEADSET” or a headset icon near it like shown on the image to the
right.)
b) For
Polycom SoundPoint IP 321, 331, 331c, SoundPoint Pro SE-220, SE-225 phones
, choose
the
2.5mm Quick Disconnect Cord
and connect it to the low right hand side of the phone:
2. Connect the headset with the quick disconnect cord
3. Adjust the length of the headband and turn the earpieces slightly until the headset fits
comfortably.
4. Put the earpiece on left or right ear.
5. At the other end of the headband, position the T-bar above your ear.
6. Rotate the microphone boom to put the microphone in front of the mouth.
7. To optimize the position of the microphone, adjust the microphone stem in either direction so the
microphone is close to the corner of your mouth and the white dot at the microphone should be
facing to your mouth.
8. Attach the clothing clip at a comfortable level to keep the headset properly positioned and free
form the cord’s weight.
