7
7
OvisLink
RS-1000
Step 5:
Click on
New Entry
button.
Step 6:
When the
New Entry
option appears, enter the following
configuration:
Source Address
– select
Inside_Any
Destination Address
– select
Outside_Any
Service
- select
ANY
Action
- select
Permit
Click on
OK
to apply the changes.
Step 7:
The configuration is successful when the screen below is
displayed. Make sure that all the computers that are connected to
the LAN port have their Default Gateway IP Address set to the
Security Bandwidth Management’s LAN IP Address (i.e.
192.168.1.1). At this point, all the computers on the LAN network
should gain access to Internet immediately. If a Bandwidth
Management filter function is required, please refer to Address and
Policy sections.
English
English
Engli
sh
