Ovislink AirLive ePhone-1000, Руководство пользователя

Страница: 14 / 46

- 14 -
Configuring Network Settings
Network settings allow the
AirLive ePhone-1000
to connect to a specific network
environment.
DHCP
is the default setting for the
AirLive ePhone-1000
. This setting enables internet
connections with any DHCP environment.
If either
PPPoE
or
Static IP
are used, change the default network setting of
AirLive
ePhone-1000
to one of these network environments.
Using the keypad you can select
DHCP
,
Static IP
or
PPPoE
for your network environment
Each of these three options is described below.
Configuring for DHCP
Connect the power adaptor of
AirLive ePhone-1000
and connect the PPPoE network
to the RJ-45 port.
Press 1, 2, 3, 4, # (Hold the “#” key)
Enter a [Password]
Press 1, 2, 3, 4 and Enter
Æ
Network Settings appears.
Press Enter Æ enter the [iptype]
Press SPD/Hold
When the Blinking Cursor appears press 1 and press Enter (1 sets the networking
settings to DHCP).
Configuring for Static IP
Connect the power adaptor to the
AirLive ePhone-1000
Connect the PPPoE network to the RJ-45 port.
Press1, 2, 3, 4, # (Hold the “#” key) → enter a [Password]
Press 1, 2, 3, 4 and Enter → Network Settings appears.
Press Enter → [iptype] →
Press SPD/Hold → a Blinking Cursor appears