Overmax X-Quest, Руководство пользователя

Страница: 13 / 46

EN
How to use
1.
Start the car by sliding the switch into ON (fig. 11). Do the same with
the controller.
2.
Place the car on a flat surface. Wait for about 15 seconds so that the
controller can pair with the car. Power light will start glowing continuously
and the car will be ready for operation.
3.
To go forward, slide the throttle backwards. To reverse, slide the throttle
forward. The farther you slide it, the faster the car goes.
4.
To turn left, turn the know in an anti-clockwise direction. To turn right,
turn the knob in a clockwise direction.
5.
To increase speed from default low, press the speed switch. The car will
glow twice. To restore low speed, press the speed switch again.
How to clean and maintain
1.
Before you start cleaning, switch the device off and remove battery.
2.
Do not use chemicals to clean the device. Use a dry cloth for cleaning.
3.
Do not immerse the device in water.
4.
Store in a dry, cold and dark place.
The pictures are for reference only. The real design of products may differ from the pictures presented.