Overmax X-Monster 3.0, Руководство пользователя

Страница: 15 / 44

EN
HOW TO CHARGE CAR BATTERY
1.
Switch the car off.
2.
Connect the charger to USB port in the PC or USB feeder. Next, con-
nect the battery to the charger. When charging, green LED will flash.
3.
Connect the battery to the charger.
4.
When the battery is full, green LED will be on continuously. After
charging, disconnect the battery from the charger.
NOTE
After using in the car, wait 10-15 minutes before you start charging
the battery. Do not leave the charging battery unattended.
HOW TO USE
1.
Move the car switch into ON.
2.
Move the controller switch into ON. The power LED will start
flashing. Wait about 15 seconds until the controller has con-
nected with the car. The LED will be on continuously.
NOTE!
Always switch the car on in the first place. Otherwise the contro-
ller may have difficulties in connecting with the car.
3.
To move forward, move the choke valve to the back. The stron-
ger you move the valve, the higher the speed of the car.
Slide the choke valve to the front to stop and reverse.