14
Frequency Response 300-3000Hz
Distortion Less than 10% @ 3 watts @ 1000Hz
Built-in Speaker 16 ohms, round
External Speaker 8 ohms; disable internal speaker when connected
(Not Supplied)
PA SYSTEM
Power Output 4 watts into external speaker
External Speaker for PA 8 ohms; a separate jack is provided (Not
Supplied)
(Specification Subject to change without notice)
Installation
Location
Plan the location of the transceiver and microphone bracket before starting the
installation. Select a location that is convenient for operation and does not interfere
with the driver or passengers in the vehicle. In automobiles, the transceiver is usually
mounted to the underneath of the dash panel, with the microphone bracket beside it.
Mounting Connection
The transceiver is held in the universal mounting bracket by two thumb screws,
permitting adjustment at the most convenient angle.
A universal mounting bracket is supplied along with self tapping screws and star
washers. The mounting must be mechanically strong and also provide a good
electrical connection to the chassis of the vehicle. To mount the transceiver:
1.
Determine the most convenient location in your vehicle. Hold the radio with
mounting bracket in the exact location desired. If nothing will interfere with
mounting it in the desired position, remove the mounting bracket and use it as a
template to mark the location for the mounting screws.
2.
Drill necessary holes and secure mounting bracket in location.
