[13]
Select the appropriate NiMH/NiCd battery cell
count using the “INC” and “DEC” arrow buttons.
Press “Cycle Time” to set how many times you
wish to cycle the battery, and press “Cycle Mode
to set the sequence of charging and discharging.
Set the charge/discharge current. Touch “Chg
Curr” to set the charge current (0.1-10A) and
touch “Dchg Curr” to set the discharge current
(0.1-2A).
Set the discharge end voltage of the pack.
Once the cycling process has begun the data
interface will be shown on the screen. If you
have connected a temperature sensor, data of
this will also be displayed (see T1).
Содержание TS80
Страница 1: ......
