10400357-002 11/2017
©2014-17 Overland Storage
Page 1 of 4
*10400357-002*
SnapServer
®
DX2
Add-on/Spare PCIe Card Instructions
This document describes how to add a PCIe card to or replace
an existing PCIe card in an Overland-Tandberg SnapServer
DX2.
WARNING:
To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working with
the unit.
WARNUNG:
Um das Risiko eines elektrischen Schlags oder
Schäden am Gerät zu vermeiden, ziehen Sie stets den
Netzstecker, bevor Sie an der Einheit arbeiten.
AVERTISSEMENT:
Pour réduire le risque de choc électrique
ou endommagement de l'équipement, retirez toujours les
cordons électriques en travaillant avec l'appareil.
CAUTION:
While working with the unit, observe standard
Electrostatic Discharge (ESD) precautions to prevent damage
to micro-circuitry or static-sensitive devices.
NOTE: The Spare may come without the mounting bracket.
Reuse the existing bracket.
Register a New PCIe Card
NOTE: If you are only replacing an existing PCIe card, skip ahead to
the next section,
It is
essential
that the product be registered because technical
and warranty support is
not available
until then.
For an existing customer:
1.
Go to
http://support.overlandstorage.com/
2.
Enter your
e-mail address
and
password
, and then
press
Enter
or click the right arrow (
>
).
3.
At the Support Home page, click
Register New
.
4.
Enter the requested information and click
Submit
.
Your warranty certificate will be emailed to you. Follow
the instructions in the email to complete the process.
For a new customer, go to the
and follow the instructions.
Existing User Login
New User Registration
Prepare the Unit
Power Off and Disconnect
If the unit is still running, power it down cleanly:
1.
Use the Web Management Interface to power off the unit
(
Maintenance > Shutdown/Restart > Shutdown
).
2.
When all the LEDs are off, disconnect the
power cords
.
3.
Disconnect the remaining
cables
from the unit, noting
their locations.
Enter
Enter
Enter
All Fields
Power Sockets
Data Cables
