Overland Storage SnapSAN VSS, Руководство пользователя

Страница: 30 / 39

SnapSAN VSS User Guide
10400401-001 08/2012
©2012 Overland Storage, Inc.

A-7
iSM13874: No suitable SV was found for BV < aaa...a >.
iSM13875: Failed to create. BV=< aaa...a >, SV=< bbb...b >.
iSM13876: Failed in waiting for the active state. BV=< aaa...a >, SV=< bbb...b >.
iSM13877: Failed to import. LDNAME=<aaa…a>.
Term Description
Type ERROR
Explanation Shows that no SV suitable for VSS backup was found for the logical disk name indicated
by aaa...a.
aaa...a: Logical disk name
Measure After checking messages output by ControlCommand, check whether there is a
mistake in setup by referring to the “Snapshot User’s Manual (Installation and
Operation Guide for Windows)” or 2.6.1 “For Backup Server Connected to Snapshot LV”.
Term Description
Type ERROR
Explanation Shows that snapshot creation failed. aaa...a: BV logical disk name bbb...b: SV logical
disk name
Measure After checking messages output by ControlCommand, check whether there is a mistake
in setup by referring to the “Snapshot User’s Manual (Installation and Operation Guide
for Windows)” or 2.6.1 “For Backup Server Connected to Snapshot LV”.
Term Description
Type ERROR
Explanation Shows that a wait for snapshot completion failed. aaa...a: BV logical disk name
bbb...b: SV logical disk name
Measure After checking messages output by ControlCommand, check whether there is a mistake
in setup by referring to the “Snapshot User’s Manual (Installation and Operation Guide
for Windows)” or 2.6.1 “For Backup Server Connected to Snapshot LV”
Term Description
Type ERROR
Explanation Shows that importing of a snapshot failed
aaa...a: Logical disk name of import target (RV or LV)
Measure If you select Protection Manager as a requester, after checking the state and pairing of
the logical disk, set the volume to its initial state by referring to the “Protection Manager
CLI User’s Guide”. If you select a different requester, set the volume to its initial state by
referring to Chapter 3 “Actions When Error Occurs”.
It is also possible that the control volume was not set. Check the control volume setting.