Part Number 10400209-102 01/2009
©2008,2009 Overland Storage, Inc.
Page 4 of 4
WARNING: Use care when extending the library out of
a rack to the maintenance position to prevent tipping
of the unit causing damage or personal injury.
Power On the Library
1.
With the library in the extended maintenance position,
plug the
power cords
back in.
2.
Turn the power supply
switches
to ON (|).
3.
Observe the inside of the library during the POST
process to verify the
shuttle
assembly installation:
•
Watch the
shuttle assembly and track
movement.
•
Make sure that nothing interferes with the flex cable
assembly through its
full range of motion
.
NOTE: If problems occur, contact Overland Storage
Technical Support.
Replace the Cover
1.
In the maintenance position, slide the
cover tabs
into
their slots and gently set the front top cover into place.
2.
Insert the
two retained screws
and tighten them.
3.
Carefully slide the
library
back into the rack and
secure it.
Run a Drive Cycle Diagnostic
Library diagnostics test the library’s operational
mechanisms to make sure they are running and operating
properly. The Drive Cycle diagnostic randomly fetches
cartridges from slots and inserts them into the drives.
To run the Drive Cycle diagnostic, follow these steps:
1.
From the touch-screen GUI, press
Menu
>
Diagnostics
.
2.
From the Diagnostics screen, press
Drive Cycle
.
3.
Press
Start
.
4.
When the diagnostic is done, check the
error status
.
•
If there are
no errors
, the library is ready to run.
•
If you do receive
errors
, note them and contact
Overland Storage Technical Support.
Power On and Test the Library
Additional Help
You can get additional technical support on the Internet at
http://support.overlandstorage.com
, or call
1-877-654-3429 (toll-free U.S. & Canada), +44 (0) 118-9898050 (Europe), or +1 (858) 571-5555 Option 5 (International).