7
For the latest version of this document, please go to:
http://www.overlandstorage.com/pdfs/SnapServer_NAS_Config_Guide.pdf
©2014 Overland Storage. All trademarks and registered trademarks are the property of their respective owners. The information contained herein is subject to change without notice and is
provided “as is” without warranty of any kind. Overland Storage shall not be liable for technical or editorial errors or omissions contained herein.
SnapServer
®
DX Series Configuration Guide
2.3
SnapServer Networking Options
2.3.1
SnapServer DX1 Networking
The SnapServer DX1 includes dual 1GbE networking ports. There are no options at this time to add addition 1GbE ports or 10GbE
ports.
2.3.2
SnapServer DX2 Networking
The SnapServer DX2 includes dual 1GbE networking ports. Customers can add the quad-‐port 1GbE PCIe card for an additional four
ports. The maximum number of supported 1GbE ports is six.
If 10GbE networking is desired, customers can purchase one of two options:
OV-‐ACC902030
ACC -‐ PCIe Card, DX2, Dual Port 10GbE SFP+ NIC
This option includes two 10GbE (integrated SFP modules) optical LC connectors. Customers will require two LC-‐LC optical
cables for connections to a 10GbE optical switch. Please note that customers will also need two SFP modules at the switch end.
OV-‐ACC902031
ACC -‐ PCIe Card, DX2, Dual Port 10GbE RJ-‐45 NIC
This option includes two 10GbE RJ-‐45 copper connectors. Customers will require two CAT-‐6 Ethernet cables for connection to
their 10GbE switch.
