Overhead door INFINITY 2000, Инструкция по установке, программированию и эксплуатации

Страница: 10 / 44

8
5) Mount opener to door shaft.
If the door shaft is NOT keyed, slide opener assembly onto door shaft and tighten setscrews finger tight.
If the door shaft IS keyed, insert provided key into either keyway. Pull emergency release cable at the bottom
of the opener to allow free rotation of the output shaft to “clock” the keyways together.
Tighten set screws onto door shaft finger tight.
NOTE : The mounting of this opener to the door shaft is designed so the door shaft will slide through the coupler
and enter the hollow output shaft of the opener up to 3 -3/8” (there is a stop pin located in the center of the
opener output shaft).
INSTALLING THE OPENER
(CONT’)
DOOR
DOOR TORSION SHAFT
CABLE DRUM
RELEASE CABLE
SOLID OR HOLLOW
DOOR SHAFT NO KEY
SOLID KEYED
DOOR SHAFT
OPENER REMOVED FOR CLARITY
RIGHT HAND INSTALL SHOWN
Bracket can be
mounted to
opener on either
side depending
on mounting
requirements.