3
Version: 1.1
ELECTRICAL DIAGRAM
INSTALLATION INSTRUCTIONS
SAFETY
In order to maintain these conditions and ensure safe use, the user must follow the indications and markings contained in the following instructions.
Warning
: Failure to follow the instructions below can result in death.
•
Upon receipt of the instrument, before proceeding with the installation, check that it is intact and has not been damaged during
transport.
•
Check that the operating voltage and the mains voltage coincide and then proceed with the installation.
•
The instrument power supply must not be grounded.
•
The instrument does not have a fuse to protect the power supply, so it must be protected by the installer.
•
Maintenance and/or repair operations must be carried out only by qualified and authorized personnel.
•
If you suspect that the tool is no longer secure, take it out of service and make sure it is not used inadvertently.
•
Dangerous voltages can be present on voltage and current transformers. Follow standard safety precautions before performing
any installation or service activity.
•
The instrument and its connections must be properly protected.
•
The instrument must be installed following all local regulations.
Precautions
: Failure to follow the instructions below can cause persistent damage to the instrument.
•
The digital outputs and inputs are low voltage and cannot be connected to external power sources.
