oventrop 138119012, Руководство по эксплуатации

Страница: 12 / 16

Installation Valve for return layering with actuator DN 25
12
138119084-V01.07.2020
5.3 Electrical connection of the actuator
Also consult the operating instructions of your fresh water station!!
DANGER
Danger to life due to electric current
Danger to life due to contact with live components.
f
Completely disconnect the product from the power supply.
f
Check that no voltage is present.
f
Secure the product against switching back on.
f
Only install the product in dry indoor areas.
NOTICE
Damage to electronic components due to electrostatic discharge
f Before touching the inside of the housing, take suitable equipotential bonding measures. Touch an
earthed component such as a tap or radiator.
1 2 3 4
ON DIP
S5 S6 S7 S8 S-Bus
K-Bus
LIN-Bus
S2 S1 S3 S4
100 – 240 V | 50 – 60 Hz T4A
R1-4 | 1 (1) A 240 V~
R5 | 4 (2) A (100 ... 240) V~
R5
IP 22
X-45
VN: 1.0
Paul-Oventrop-Straße 1
D-59939 Olsberg
GND GND GND GND
GND
10V Signal
Sika
DISPLAY
PE N L' PE N L' PE N R1 PE N R3 A M R
PE N L PE N L' PE N R2 PE N R4
PWM1 PWM2 PWM3 PWM4
L L
L L
N N
N N
N
N N
L‘
L‘ L‘
Illust. 10: Terminal assignment of the Regumaq X-45
Illust. 11: Connection diagram of the actuator
Colour Function
L‘
brown Outer conductor (phase)
L black Phase switched
N blue Neutral conductor