BASIC OPERATION OF THE KETTLE
a)
Press the “
” key shortly, you will hear a “beep” sound to indicate that the
kettle is on.
b)
After the water boils, the indicator light will turn off and the buzzer sends
out a group of “beep” sounds at the same time.
c)
Unplug the kettle after using it.
ADVANCED OPERATION OF THE KETTLE
a)
Press “
”for 3 seconds, the buzzer will send out a “beep” sound. A red LED
light will appear to indicate that the kettle is running the heat insulation
function. Each time that the water will reach 185°F, it will start heating again.
Note: The heat insulation function is good for 2 hours.
b)
Press “
” once, the green LED indicator light up for 140°F. This means that the
kettle will stop heating when the water temperature is at 140°F.
c)
Press “
” twice, the blue LED indicator light up for 158°F. This means that the
kettle will stop heating when the water temperature is at 158°F.
d)
Press “
” three times, the yellow LED indicator light for 176°F. This means
that the kettle will stop heating when the water temperature is at 176°F.
e)
Press “
” four times, the purple LED indicator light for 194°F. This means that
the kettle will stop heating when the water temperature is at 194°F.
f)
Unplug the kettle after using it.
5
ovente.com