Ovente GP0620 Series, Руководство пользователя

Страница: 9 / 12

Unplug the Grill from the wall outlet and allow it to cool
completely
.
Wipe the Cooking Plates with a sponge or cloth
dampened in warm soapy water
.
Always dry plates thoroughly after cleaning
.
To remove
stubborn stains or food
,
use a nylon brush or other
utensil safe for nonstick surfaces
.
Do not use steel wool or scouring pads
.
Do not use
abrasive cleansers
.
Wipe the exterior with a clean
,
damp cloth
.
Dry all parts
thoroughly before using again or storing
.
DO NOT USE ABRASIVES OR METAL UTENSILS
.
DO NOT IMMERSE GRILL HOUSING IN WATER OR ANY
OTHER LIQUID
.
PANINI GRILL CARE & MAINTENANCE
9
ovente.com
ELECTRICAL REQUIREMENTS
Voltage
: 120
V
Power
: 1000
W
Hertz
: 60
Hz
Your Panini Maker is best used with thick
,
crusty breads
,
such as French
,
Italian
,
and focaccia
.
You can grill a Panini to
perfection in about
3
minutes
(
depending on the bread
,
filling
,
and personal taste
).
Your Panini Maker can also be
used to grill a variety of food items
,
such as meats
,
poultry
,
fish
,
and vegetables
.
Warning
:
Always ensure that your Drip Cup is in place before
using your Panini Press
.
Never use your Panini Maker
without your Drip Cup in place
Preheat the grill
.
Your grill will not properly preheat unless
the grill is in the closed position
.
Close the cover and plug into a
120-
volt
60
HZ AC outlet only
.
The red light will turn on indicating that the appliance is
preheating
,
and the green light will illuminate when the
appliance is preheated and ready for use
.
Open the lid being careful not to touch any hot surfaces
such as the housing or grill plates
.
We recommend the use
of oven mitts or potholders to prevent the risk of injury
.
Place items to be cooked on the bottom grill plate
.
BEFORE FIRST USE
Carefully unpack your Panini Grill
.
Remove all packaging
materials
.
Place the device on a flat
,
level surface close to a
120
volt
wall outlet
.
Wipe off both Cooking Plates with a damp cloth so that they
are clean and free of any manufacturing oils that may be left
on the surface
.
Wipe the outside of the Grill Housing with a soft damp cloth
.
NEVER immerse the grill
,
power cord and plug in water or
any other liquid
.
Plug into the wall outlet and heat for
5
minutes
.
This will burn
off any residue from the manufacturing process
.
NOTE
:
There may be a small amount of smoke or
odor during this time but it will not last longer than a
few minutes
.