Ovation E-910FC, Руководство пользователя

Страница: 18 / 28

Operation
-14- Ovation E-910FC User Manual Rev. 8
Dimmer Profiles
This setting determines how fast the output of the Ovation E-910FC changes when you modify
the values of the red, green, blue, amber, lime, and dimmer faders. This setting provides four
different options to simulate the dimming curve of an incandescent lighting product.
1. Go to the
Dimmer Mode main level.
2. Select a dimmer curve ( Off , Dimmer 1 , Dimmer 2 , or Dimmer 3 ).
Off: The output is proportional (linear) to the dimmer and RGBAL channel values.
Dimmer 1–3:
The output follows the dimmer and RGBAL channel values based on the
corresponding dimmer curve,
Dimmer 1 being the fastest and Dimmer 3 the
slowest.
For optimum control of the 16-bit dimming channels in the 10Ch, 13Ch, and 15Ch
personalities, be sure that the dimming curves in Dimmer Mode are set to Off.
White Calibration
This setting selects the white color shown by the Ovation E-910FC when the the DMX
controller’s red, green, and blue faders are set to
255 .
1. Go to the White Balance main level.
2. Go to Manual to set the color values or Off to set the faders to linear.
3. Select a color ( Red , Green , or Blue ).
4. Select a color value ( 125 – 255 ).
5. Repeat for the other colors.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the
Ovation E-910FC.
6. Go to the
LED Frequency main level.
7. Choose an output frequency. ( 600Hz , 1200Hz , 2000Hz , 4000Hz , 6000Hz , or 25KHz )
Fan Mode
This option toggles the fan speed from being always on and auto control based on the products
temperature.
1. Go to the
Fan Mode main level.
2. Select a fan mode ( Auto , or On ).
Back Light
This setting allows you to set the amount of time the backlight on the Ovation E-910FC’s display
stays on after the last button is pressed on the control panel.
1. Go to the
BackLite main level.
2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (seconds).
Run Time
This option show how many total hours the product has been on.
1. Go to the
Information main level.
2. Select Fixture Hours and the amount of hours will show on the screen.
Software
Information
This option shows what version of software the Ovation E-910FC is running.
1. Go to the
Information main level.
2. Select Version and the version number will show on the screen.
RDM
This option shows the product’s UID #. The UID # is used when using the RDM functionality of
this product.
1. Go to the
Information main level.
2. Select UID: and the number will show on the screen.