
EN
8
Ovation Rêve E-3 IP QRG Rev. 4
QUICK REFERENCE GUIDE
Master/Slave
Master
Receives DMX signal from the DMX controller (master)
Slave
Receives DMX signal from the master unit
Dimmer
Curve
SCurve
Sets the dimmer curve
Linear
Square
Inverse Square
Dimmer Mode
Off
Linear dimmer
Dimmer 1–3
Dimming curves, from fast (
Dimmer 1
) to slow (
Dimmer 3
)
Color
Calibration
Off
Deactivates color calibration
User
Calibration
Red
125–255
Sets red LED maximum value
Green
Sets green LED maximum value
Blue
Sets blue LED maximum value
Amber
Sets amber LED maximum value
Mint
Sets mint LED maximum value
Factory Calibration
Uses factory default white setting
LED
Frequency
600Hz
Sets the PWM output frequency
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Fan Mode
Auto
Sets the fan to auto mode
On
Sets the fan to always on
Off
Sets the fan to always off
Silent
Sets the fan to silent
Back Light
10S
Turns off display backlight after 10 seconds of inactivity
30S
Turns off display backlight after 30 seconds of inactivity
2Min
Turns off display backlight after 2 minutes of inactivity
Always On
Display backlight always on
Key Lock
On
Enables/disables display lock
(Password
<UP>
,
<DOWN>
,
<UP>
,
<DOWN>
,
<ENTER>
)
Off
Gobo Power
On
Enables/disables gobo power output
Off
Information
Fixture Hours
_ _ _ _H
Shows total hours the product has been powered on
LED Hours
_ _ _ _H
Shows total hours the LED has been powered on
Version
V_._
Shows current firmware version
UID
_ _ _ _ _ _ _ _ _ _ _ _
Shows product UID
Update
Firmware
Only This Unit
_ _ _ _ _ _.CHL
Selects an update file for this product, or
shows “
No such file!
”
...
Multiple Units
_ _ _ _ _ _.CHL
Selects an update file for this and connected
Ovation Rêve E-3 IP products, or shows “
No such file!
”
...
Other Fixture Type
_ _ _ _ _ _.CHL
Selects an update file for other connected products,
or shows “
No such file!
”
...
Factory Reset
No
Resets settings to factory default
Yes
WARNING: When operating in Fan Mode: Off and Fan Mode: Silent, the fixture will become hotter to
the touch than when using other fan modes. Use proper protective equipment to prevent burns. Keep
a safe distance from flammable objects.
NOTICE: When operating in Fan Mode: Off and Fan Mode: Silent, output of the fixture will be reduced
and will not reach the same levels as when using other fan modes.
Main Level
Programming Levels
Description
!