Ovation C-805FC, Руководство пользователя

Страница: 10 / 31

Page 7 of 28
S
ETUP
Ovation C-805FC User Manual Rev. 3
4. S
ETUP
AC Power
Each Ovation C-805FC has an auto-ranging power supply that works with an input voltage range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each Ovation C-805FC, refer to the label
affixed to the product. You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website:
www.chauvetprofessional.com .
.
AC Plug
The Ovation C-805FC comes with a power input cord terminated with a Seetronic Powerkon A connector
on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with your
product has no plug, or if you need the change the plug, use the table below to wire the new plug.
Power Linking
The product supports power linking. You can power link up to 9 products at 120 V; up to 16 at 208 V; or up
to 17 at 230 V.
This product comes with a power input cord. Power linking cables are available from Chauvet for
purchase.
DMX Linking
You can link the Ovation C-805FC to a DMX controller using a 3- or 5-pin DMX connection. If using other
DMX-compatible products with this product, you can control each individually with a single DMX controller.
DMX Personalities
The Ovation C-805FC uses a 3- or 5-pin DMX data connection for the 3, 4, 5, 6, 8, 9, 10, 15, 17, 19, 20,
and 31-channel DMX personalities.
• Refer to the Introduction for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the Ovation C-805FC to work in these
personalities.
• The DMX Values section provides detailed information regarding the DMX personalities.
• Always connect the product to a protected circuit (fuse or circuit breaker). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging
it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a
DMX controller, download the DMX Primer from the Chauvet website:
www.chauvetprofessional.com .
!