28
DHCP IPv4: Obtain an IPv4 IP address from DHCP server
on LAN automatically.
DHCP IPv4 / IPv6: Obtain both IPv4 and IPv6 address
from DHCP server on LAN automatically.
Static IPv4 / IPv6: Assign an IPv4 / IPv6 address to IP
camera manually. If you don’t have a DHCP server on
your local area network, you must use this option to
specify an IP address.
IP Address(IPv4): Input IPv4 IP address*
IP Address(IPv6): Input IPv6 IP address*
Prefix Length: Input IPv6 IP address’ prefix length
(0-128)
Subnet Mask: Input subnet mask
Gateway: Input gateway address
Primary DNS: Input DNS server’s IP address
Secondary DNS: Input backup DNS server’s IP
address, you can leave this field blank.
* You can leave this field blank, if you only wish to
use IPv4 or IPv6 IP address.
Enable UPnP Discovery: Check this b ox to enable other
devices on network to discover the presence of this IP
camera by UPnP. It’s recommended to enable this
function.
Enable UPnP Port Mapping: When UPnP is enabled,
check this box to enable UPnP’s port mapping.
PPPoE
Select this option to use PPPoE to connect to network.
You have to input PPPoE username and password
assigned by network operator to get connected.
HTTP Port
Input IP camera’s web connection port number here.
When this port number is changed, you need to change
web browser’s port number you used to connect to IP
camera.
Содержание OVC-3BIR
Страница 1: ...3MP_IP_Bullet Network Camera User Manual...
