OUYANG MATILDA 20, Руководство пользователя

Страница: 16 / 16

Page Fourteen
RETRACKET MOTOR MOUNT
The undernoted is in reference to the type manufactured by
G. B. Mills Company. Inc.
The Model 26 bracket for the MATILDA 20 has been designed for
outboard motors with rated horsepower from 2½ to 6 included. This
bracket will also accommodate the lightweight 7 HP Scott motor.
The Model 710 bracket for the MATILDA 23 has been designed for
outboard motors with a rated horsepower from 7½ to 10.
D0 NOT UNDER ANY CIRCUMSTANCES ATTEMPT TO ADJUST THE SPRING TENSION
ON THESE BRACKETS. THEY HAVE BEEN PROPERLY CALIBRATED AT THE PLANT,
AND REQUIRES NO FURTHER ADJUSTMENT --- ANY ATTEMPT T0 TAMPER WITH
THE SPRING ADJUSTMENT MAY RESULT IN DAMAGE T0 THE BRACKET, OR COULD
CAUSE PERSONAL INJURY.
Any attempt to mount motors of higher rated horsepower than that for
which brackets have been designed may damage the bracket and will
automatically void the guarantee.
INSTRUCTIONS FOR USE
As will be observed, the Retracket Mount has been designed so that
the counterbalancing spring energizes the side bail arms over centre
to give an automatic locking action in the parked position. As the
motor mount plate is pushed outward and down, a point reached where
the weight of the motor over balances the force of the spring
sufficiently to cause the motor to drop firmly against the stop
position and ready for use.
For spare parts and warranty claims, please see listings under
“Manufacturers”.