Made in China
STEP FOUR
Attach Swing Post (E) to the outside of Arm (J) and the inside back of
Seat (G) with two Large Bolt-Nut-Washers (N). Repeat step for other
side.
STEP FIVE
To build the frame, start by attaching Top Cross Bar (A) to Legs (B) using
two sets of X-Large Bolt-Nut-Washers (O), one each side. Attach Cross
Support (D) to the outside of each Leg (B) using four sets of Small Bolt-
Nut-Washers (L), two each side.
STEP SIX
Attach four Top Supports (C) to Top Cross Bar (A) and Legs (B) using
four Small Bolt-Nut-Washers (L) in the lower holes and two sets of X-
Large Bolt-Nut-Washers (O) in the top holes. Place two Eye Bolt-Nut-
Washers (P) up through the Top Crossbar (A).
STEP SEVEN
Securely tighten all Screws/Bolts and Nuts. Hang the Swing by
connecting the S-Hooks (Q) to the Swing and Frame using two S-Hooks
for each side. Assembly complete.
Tete-to-Tete Swing Assembly Instructions
