2
EN
Step 2: Attach the connector (J) with the small hole facing up to the fire bowl (B),
using bolts (F) and nuts (D1). Tighten all bolts with an Allen wrench (I) (Fig. 2).
Step 3: Screw the lid ring (E) onto the mesh lid (C) using the nut (D2). Place the
mesh lid (C) onto the assembled base (Fig. 3).
FIG1
FIG2
FIG3
If rusting occurs, it is recommended to use a steel brush, followed by a spray
coating of high temperature anti-rust paint.
To keep the bowl, grate and mesh lid from rusting, it is recommended to apply a
coat of high temperature primer (such as rustoleum or similar brands) before use.
Ensure the fire pit has completely cooled down before placing a cover or storing.
Assembly instructions
Ensure bolts are not too tight.
Step 1: Attach base (A) to the fire bowl (B) using bolts (G) and nuts (D1). Tighten all
bolts with an Allen wrench (I) (Fig. 1).
