MAINTENANCE
To enjoy years of outstanding performance from your heater, make sure you perform
the following maintenance activities on a regular basis:
Keep exterior surfaces clean.
Use warm soapy water for cleaning. Never use flammable or corrosive cleaning
agents.
While washing your unit, be sure to keep the area around the burner and pilot
assembly dry at all times. If the gas control is exposed to water in any way,
DO NOT
try to use it. It must be replaced.
Airflow must be unobstructed. Keep controls, burner and circulation air
passageways clean. Signs of possible blockage include: Gas odor with extreme
yellow tipping of flame.
Heater does
NOT
reach the desired temperature.
Heater glow is excessively uneven.
Heater makes popping noises.
Spiders and insects can nest in burner or orifices. This dangerous condition can
damage the heater and render it unsafe for use. Clean burner holes by using a heavy
duty pipe cleaner. Compressed air may help clear away smaller particles.
Carbon deposits may create a fire hazard. If any carbon deposits develop, clean
dome and engine with warm soapy water.
Note: in a salt-air environment (such as near the sea), corrosion occurs more quickly
than normal. Frequently check the corroded areas and repair them promptly.
SERVICING
Please consult your local dealer for servicing this appliance and replacement of its
parts. The servicing of the appliance shall be carried out only by authorised
personnel.
Caution: do not use unauthorized parts or components for this appliance, only use
original equipment replacement parts and components. Theuse of unauthorized parts
or components will void the warranty and can create an unsafe condition.
STORAGE
There is no limitation on the storage of the appliance indoors provided that the
cylinder is removed from the appliance.
Between uses:
Turn control knob
OFF
Turn gas cylinder
OFF
Store heater upright in an area sheltered from direct contact with inclement weather
(such as rain, sleet, hail, snow, dust and debris).
If desired, cover to protect exterior surfaces and to prevent build up in air passages.
Note: Wait until heater is cool before covering.
During periods of extended inactivity or when transporting:
Turn control knob
OFF.
Disconnect gas cylinder and move to a secure, well ventilated location outdoors.
DO NOT store in a location that will exceed 50°C.
Store heater upright in an area sheltered from direct contact with inclement weather
(such as rain, sleet, hail, snow, dust and debris).
If desired, cover heater to protect exterior surfaces and to prevent build up in air
passages.
Note: Wait until heater is cool before covering
