STEP 3-SEAT ASSEMBLY
7.Use 4 seat bolt
⑿
assembly to fix the plastic seat
⑾
on the frame.(Figure 5)
STEP 4- TOW ROPE AND HANDLE ASSEMBLY
8.The unit has been equipped with a tow rope
⒂
and handle; the tow rope can easily be
affixed to the front ski as shown. (Figure 6)
This is the only correct riding position. (as left pic shows)
Check all screw parts and make sure they are all properly
tightened and in good working condition before using the
product.
Always wear protective equipment such as helmet, goggles
and gloves.
Always keep the rider positioned near the front for increased
control and steering. As body shifted closer to the back, the
steering and control are reduced.
The breaking system does not allow for a quick short stop. It is
solely intended as a way to gradually reduce the downhill
speed.
Be sure to learn and practice with lots of room and shallow hill.
You may progress to larger hills as you feel more confident.
Make sure you have enough room to slow and stop in all
situations.
Always replace the locking buckle in the front ski before every
use.
DO NOT tow behind any motorized vehicle or people when the
rider is sitting on the product.
IMPORTANT
-5-
