ø7/32 in.(5.5mm)
3A-1
3A-2
3A-3
3A-4
7/32 in.(5.5mm)
Wood Drill
2 9/16 in.(65mm)
A1
A2
STEP 3B
Avoid potential personal injury or property damage! DO NOT
over-tighten the lag screws [A1]. Tighten the lag screws [A1] only until
the washers [A2] are pulled firmly against the wall plate
[01]
.
WARNING:
WARNING:
Ensure the wall plate is securely fastened to the wall
before continuing on to the next step.
Drywall covering the wall must not exceed 5/8 in. (16
mm)
Wall
Anchor
A3
Solid Concrete or Concrete Block Option
Ensure marking at
the center of the
stud.
Center line
Drill 4 pilot holes using
a 7/32 in. (5.5mm)
Wood Drill diameter
drill bit.Make sure the
depth is not less than
2 9/16 in.(65mm).
Mount the wall plate using 4
sets of M8X65 lag screws A1
and washers A2 with a 1/2
in.socket wrench(not included).
1/2in.(13mm)
socket wrench
Use a stud finder (not included) to
locate wood stud. Mark the edge
and center locatons.
5
