OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel. +39 030.3581341
Fax +39 030.3580431
www.outline.it
5
3. WIRING
The electro-acoustic features of the components
are dimensioned according to the criteria described
above to obtain the best possible performance of the
subwoofer in conditions of extreme reliability and very
low distortion. It is enough to have an analog input
signal and mains power for a ready-to-use subwoofer.
The wiring is very simple, as shown here under:
AC into amplifier
Analog signal
3.1. CONNECTORS SPECIFICATIONS
The cable used for the audio signal wiring from the
source to the subwoofer input panel (chapter 4), is
a classic audio cable with XLR 3-pole EIA-standard
connector:
1. Ground
2. Positive
3. Negative
Alternatively, the input panel (with Combo connec-
tor) also accepts balanced 6.35 mm jack cables (TRS).
The cable used to connect to the amplifier DSP
(chapter 4) integrated in the Sub118 SP is the USB
cable with a type B connector.
For most users, the PC needs a USB type A con-
nector on the other end of the cable.
3
1
2
3
2
1
3
1
2
3
2
1
Male XLR connector
Jack 6,35 mm
TRS connector
USB type B
USB type A
