Outline NG01, Руководство пользователя

Страница: 4 / 8

OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
www.outline.it
4
FRONT PANEL
9 8 7 6 5 4 3 2 1
1. Antenna;
2. Power LED;
3.
Pairing LED;
4.
Pairing procedure button;
5.
Pink noise selected LED;
6. White/Pink noise switch;
7. USB-C Power Supply connector;
8.
Output signal monitoring LED
9.
XLR Balanced Output
The Outline NG01 is powered by simply plugging in
the USB-C cable (7), as you can see from the Power
LED (2).
The Output signal is disabled: to turn it on it is
necessary to press the button 1 of the remote
control. When the output signal is present the
‘NOISE ON’ LED (8) lights up.
To turn off the output signal press button 2 on the
remote control.
Buttons 3 and 4 are not used.
For better and stable performance of the output
noise it is recommended to wait about two minutes.
It is possible to select at any time between White
and Pink noise using the PINK / WHITE slide switch
(6).
The ‘PAIR’ button (4) allows you to pair the
transmitter and receiver in case of battery change
or connection loss.